General Description
· Warm air hand dryer.
· Button operated.
· Suitable for medium traffic facilities.
· Compact, maintenance-free.
· Highest durability in its class.
· It normally goes along with a soap dispenser.

Components & Materials
· White ABS thermoplastic one-piece cover, 1/8” (3 mm) thick. Cover fixed to the base by means of 4 Phillips head screws.
· Engineering thermoplastic PP base, with 4 Ø 5/64” (8 mm) holes for wall mounting.
· Motor, induction, 3,300 rpm (at 60 Hz), maintenance-free and high durability, incorporates a safety thermostat.
· PP UL94-VO single inlet fan wheel.
· Waved wire NiCr resistor that incorporates a safety thermostat.
· Push-button activates an electronic timer, with a 45 seconds cycle.
· Stainless steel air outlet grill.

Operation

Press the Push-button to initiate the drying process. The dryer will go on with no interruption for 45 seconds.

Certificates
UL comply with UL 499 norm.

Technical Characteristics

Voltage:		110 - 120 V
Power consumption:		11 A
Motor:		1/7 HP
Nominal power:		1.300 W
R.P.M.:		3.300
Heating element:		1.200 W
Effective airflow:		111 CFM
Free airflow:		139 CFM
Noise level at 79''.:		60 dB
Air speed:		3.872 LFM
Temperature (at 4'' distance / 70ºF):		123.8 ºF
Insulation:		Grounding required
Frequency:		50/60 Hz
Drying time:		45"
Montaje:		Surface
Size:		9-7/8"W x 11-3/4"H x 5-1/4"D
Weight:		6.6 Lbs

Specification
Surface mounted hand dryer shall be fabricated with one-piece 1/8” thick thermoplastic ABS UL94-5V cover. The back base shall be thermoplastic ABS UL94-5V and with 4 holes for wall mounting. The dryer shall be activated using the push button that activates an electromechanical timer with a 45 seconds cycle before switching dryer off automatically. The induction motor shall be 1/7 hp, 3,300 r.p.m.(at 60 Hz) and incorporate a temperature limiter which switch off at 266 ºF (130ºC). The waved wire NiCr heating element should incorporate a thermal limiter, which will switch off by a temperature of 176 ºF (80ºC.). The PP UL94-V0 fan should have a single inlet and the fan scroll shall be made of thermoplastic ABS UL94-5V. Dryer shall deliver 139 CFM of air at 123.8 ºF (51 ºC) and 3,872 LFM velocity during user controlled drying cycle. The dryer shall have a total power of 1,300 Watts with a consumption of 11A. Noise level should be 60 dB. Overall dimensions shall be 9-7/8”W x 11-3/4”H x 5-1/4”D.

Surface-Mounted Hand Dryer shall be Model M88 of Saniflow Corporation, 12800 N.W. 38 Avenue Miami, Florida 33054-4525.