General Description
· Warm air hand dryer.
· Sensor operated.
· Suitable for medium traffic facilities.
· Compact, maintenance-free.
· Highest durability in its class.
· It normally goes along with a soap dispenser.

Components & Materials
· White ABS thermoplastic one-piece cover, 1/8” (3 mm) thick. Cover fixed to the base by means of 4 Phillips head screws.
· Engineering thermoplastic PP base, with 4 Ø 5/64” (8 mm) holes for wall mounting.
· Motor, induction, 3,300 rpm (at 60 Hz), maintenance-free and high durability, incorporates a safety thermostat.
· PP UL94-VO single inlet fan wheel.
· Waved wire NiCr resistor that incorporates a safety thermostat.
· Adjustable (2”-8”) IR electronic detection sensor.
· Stainless steel air outlet grill.

Operation

Place the hands under the air outlet grill. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the airflow.

Certificates
UL comply with UL 499 norm.

Technical Characteristics

Voltage:		110 - 120 V
Power consumption:		11 A
Motor:		1/7 HP
Nominal power:		1.300 W
R.P.M.:		3.300
Heating element:		1.200 W
Effective airflow:		111 CFM
Free airflow:		139 CFM
Noise level at 79''.:		60 dB
Air speed:		3.872 LFM
Temperature (at 4'' distance / 70ºF):		123.8 ºF
Insulation:		Grounding required
Frequency:		50/60 Hz
Drying time:		45"
Montaje:		Surface
Size:		9-7/8"W x 11-3/4"H x 5-1/4"D
Weight:		6.6 Lbs

Specification
Surface mounted hand dryer shall be fabricated with one-piece 1/8” thick thermoplastic ABS UL94-5V cover. The back base shall be thermoplastic ABS UL94-5V and with 4 holes for wall mounting. The dryer shall be activated through an infrared electronic sensor and shall automatically turn off when hands are removed. The induction motor shall be 1/7 hp, 3,300 r.p.m.(at 60 Hz) and incorporate a temperature limiter which switch off at 266 ºF (130ºC). The waved wire NiCr heating element should incorporate a thermal limiter, which will switch off by a temperature of 176 ºF (80ºC.). The PP UL94-V0 fan should have a single inlet and the fan scroll shall be made of thermoplastic ABS UL94-5V. Dryer shall deliver 139 CFM of air at 123.8 ºF (51 ºC) and 3,872 LFM velocity during user controlled drying cycle. The dryer shall have a total power of 1,300 Watts with a consumption of 11A. Noise level should be 60 dB. Overall dimensions shall be 9-7/8”W x 11-3/4”H x 5-1/4”D.

Surface-Mounted Hand Dryer shall be Model M88A of Saniflow Corporation, 12800 N.W. 38 Avenue Miami, Florida 33054-4525.