General Description
This new development removes all the water from your hands quickly thanks to a high speed jet stream that literally blasts the water in between 10 to 15 seconds.

Rather than evaporating the air rubbing your hands, the DUALFLOW utilizes 300 separate air ducts that forces air at 130 mph with a 30.000 rpm motor at only 75 dB, blowing water off the hands feeling like a “massage”. Versus other comparable units, no hand movement is needed.

Anti-microbial Microban protection is integrated into the surfaces where hands are located. Additionally the dryer has a receptacle unit to hold optional odorless filter that removes bad smells (such as human smell, tobacco, greases, etc.) from the air offering a more superior choice for customers who are looking for value, quality, cleanliness and energy efficiency hand dryer for the restroom facility.

• Elegant and innovative design.
• Dries hands in only 10 to 15 seconds.
• It activates automatically when putting hands in the drying area.
• High speed universal brush motor.
• Suitable for medium and high traffic facilities.
• Normally goes along with a soap dispenser.

Components & Materials
• High-impact ABS white cover, 1/8’’ thick.
• Housing case and water tank made of High impact 1/8’’ thick ABS.
• High speed motor. Universal brush motor, 30000 rpm, F class.
• Aluminum centrifugal double asymmetric inlet fan wheel.
• Aluminum scroll fan and safety thermal cut-off.
• It operates with two motors and without heating element.
• Electronic infrared detection sensor with polycarbonate viewing window.
• Automatic disconnection system after 23 seconds of continuous use.
• Microban antibacterial protection distributed through the relevant plastic parts of the drying system.
• Optional odourless tablets available.

• High-impact ABS white cover, 1/8’’ thick.
• Housing case and water tank made of High impact 1/8’’ thick ABS.
• High speed motor. Universal brush motor, 30000 rpm, F class.
• Aluminum centrifugal double asymmetric inlet fan wheel.
• Aluminum scroll fan and safety thermal cut-off.
• It operates with two motors and without heating element.
• Automatic disconnection system after 23 seconds of continuous use.
• Microban antibacterial protection distributed through the relevant plastic parts of the drying system.
• Optional odourless tablets available.

Operation
Simply place hands (no hand movement) into the top of the hand dryer and within a few seconds 300 separate air nozzles of air will efficiently & hygienically dry your hands. An infrared sensor located on the left top of the unit detects when hands are placed and after approximately 10-15 seconds your hands are dry, with the dryer automatically switching off after 23 seconds. When hands are removed the dryer will stop.
Simply place hands (no hand movement) into the top of the hand dryer and within a few seconds 300 separate air nozzles of air will efficiently & hygienically dry your hands. An infrared sensor located on the left top of the unit detects when hands are placed and after approximately 10-15 seconds your hands are dry, with the dryer automatically switching off after 23 seconds. When hands are removed the dryer will stop.

Certificates
UL comply with UL507 norm. Also ISO 9001:2008 and CE certified. For CE versions COMPLIANT WITH ELECTRICAL SAFETY DIRECTIVES 73/23/CEE & 93/68/CEE AND ELECTRO-MAGNETIC COMPATIBILITY DIRECTIVES 89/336/CEE & 92/31/CEE.

Technical Characteristics

Voltage:		110-120V
Power consumption:		15.9 A
Motor:		875 W x2
R.P.M.:		30000
Noise level at 79''.:		70 dB
Air speed:		125 Mph
Temperature (at 4'' distance / 70ºF):		104 ºF
Insulation:		Class II (Ground not required)
Frequency:		50/60 Hz
Drying time:		10 - 15 seconds
Installation height:		15,75’’
Dimensions:		24-1/4’’ x 11-3/4’’ x 7-1/2’’
Size:		24-1/4’’ x 11-3/4’’ x 7-1/2’’
Weight:		21,1 Lbs

Specification
Surface mounted and UL compliant hand dryer shall be manufactured with high-impact 1/8’’ mm thick ABS cover, white. The dryer should be 110-120V voltage. The dryer shall be activated through an infrared electronic sensor when putting hands inside the dryer and shall automatically turn off after hands are removed. High speed universal brush motor should be 1750 W total power, 30000 rpm, F class. The dryer shall have a total power of 1750 Watts with a consumption of 15,9 A (at 120 V). Noise level should be 70 dB at 79’’distance. Protection level against water splashes should be rating IP33. Overall dimensions shall be 24-1/4’’ x 11-3/4’’ x 7-1/2’’. Unit shall UL marked and comply with UL507 norm.